Hemming a Pants by Hands

As for the trouser hem – What you need

: There is also a video with instructions for this tutorial.
When it comes to pants, it is all about the shape. You can have a pair of pants that look great on the loot, but they are too long or short for your legs. Hemming pants is so easy that the leg length should never come between you and a pair of hot pants. If you can hem your pants, you have the advantage every time the dressing is pressed.

What you must:

Seam ripper
Scissors [recommended]
chalk
band
Sewing kit or sewing machine
Iron and ironing board
Gather supplies and be ready earlier to prepare his pants.

(Ask if you have rain on Facebook and post photos of their creations!)

More Transformations Clothing
July 2
Prepare your pants
As to hem pants
Remove the existing seam.
You will need to remove the seam that is already there. A seam ripper works much better and faster than a pair of scissors. Do not cut or push the fabric itself. Along the edge of the hem, a mark may appear zigzag or loop. This is in place to keep the end of the fraying of the fabric. Let this seam intact if possible.

Unfold the hem completely so that it hangs loose.

We will ship a fold 1/2 inch.

Plug the iron and let it warm. Some fabrics are not heated safely and melts when iron is applied, so test a small area. This step is a great way to test the pants to see if it can be solved in the future. Checking the label can sometimes give you that information. If in doubt, put a wet towel between the iron and the fabric. Iron on a 1/2 inch times to give a good crease. Repeat with the other leg.

Related Post  How to Make Sweet Potatoes Salad in the Oven ?

When ironing is finished, we can see how long you want the hem.

(Ask if you have rain on Facebook and post photos of their creations!)

More Transformations Clothing
July 3
Find your entire body
As to hem pants
Pin the top and bottom of your new hem.
Put on pants hem you want. Bring a pair of shoes you plan to wear with pants. Hemming pants without shoes are too short hem! On the side of the left leg, bending the rim and inside of the pants. Use a full length mirror to get the best idea of what the end result will look like. Adjust as needed until you see in the mirror.

Pin the hem in place up and down.

A first pin inserted along the upper hem. As we folded and ironed ½ inch in step 2, you should be able to easily feel the fabric edge from the outside of the pants. Make sure the fabric is right before inserting the second pin at the bottom. You do not have to do this for both legs. Again look in the mirror to see if she is still beautiful.

Now we will measure and pin the other leg.

(Ask if you have rain on Facebook and post photos of their creations!)

More Transformations Clothing
July 4th
Measure and Pin
As to hem pants
Measure to find the desired length.
Take off your pants. Carefully turn them inside without disturbing your pin. With your tape measure to calculate the length of bottom folding the upper edge of the fabric is folded and the inner leg. Use this measurement to fold and put the rest of the hem. The measure in at least four places in all directions to make sure it still is. Use chalk to mark each measurement. Do not use a pen, pencil or markers as they can stain and even run after washing.

Related Post  How to pack a suitcase like a professional ?

correctly measure now means less to adjust later. Measuring, bending and fixing the other leg in the same way.

Now you are ready to iron the hem.

(Ask if you have rain on Facebook and post photos of their creations!)

More Transformations Clothing
The 5 of July
Bastille iron
As to hem pants
Iron the hem to facilitate new seam.
Ironing put your new hem in place. You create a new crease along the bottom and erase the previous one, as if she was not there! Ironing may seem a not trivial, but it is the basis of folding.

Iron all the way around the bottom edge, removing pins as you go. Repeat with the other leg. If you are concerned about making mistakes, it would be another good time to try the pants back and take a second look in the mirror.

The hem can always re-measure and press again before sewing. Replacing your pins to hold everything constant, while sewing.

Once you have pressed the hem in place, you are ready to sew.

(Ask if you have rain on Facebook and post photos of their creations!)

More Transformations Clothing
July 6
to sew
How to Hem Pants
See the difference it makes hems.
If the hand sewing:
You must have selected a color of thread that matches or approximates the original thread used in the pants. It is a good idea to use a piece of wire that is about 3 feet long. You can always re-wire if they are weak, but a string that is too long will not want to manage. Thread a needle size medium. Start sewing a straight stitch 1/8 inch from the top of the border and go around. Nothing around the bottom hem.
If the sewing machine: Upload coil and the upper portion of the bobbin with the same color thread. The wire should approach or match the original thread used in the pants. Set the machine to a small way straight stitch. Start 1/8 inch seam of the upper part of the border and go around. Make sure you attach all pieces of wire inside the pants.

Related Post  How to Play Lottery ?

If sewing is not your thing, try the transparent method.

(Ask if you have rain on Facebook and post photos of their creations!)

More Transformations Clothing
July 7
Method without optional welding
How to Hem Pants
The transparent method is ideal for beginners.
For fast and easy hem, you can always try the seamless fusion method using tape. fusion band is a fusible material having an adhesive coating fabric homogeneous group join. It is a kind of double-sided tape, but heat-activated. webbing will come pre-cut into strips and ready to be applied to a project as a hem. In fact, it is also known as “hem tape.

Follow all instructions that come with their fusible material, the application may vary.

It is a good idea to try a little at a time to test this kind of pressure and heat to be applied to the plate for the best bonus.

Measuring a piece of hot melt adhesive tape which corresponds to the inside of the hem all. Nestled in iron and following the instructions on the web package fuse.