HOW TO JUMP START A CAR BATTERY THE RIGHT WAY
How to start a battery correctly
Before.You wine is probably going to turn your ignition, and nothing happens. Maybe a couple of clicks is heard. Another dead car battery? You need to solve this problem and get your vehicle back on the road – fast. If you’re ready, you already have a good set of jumper cables in your car. Now all you have to do is learn how to jump start a car battery.
Choose right cables of bridges
You do not need many tools to jump a car battery. First, you need to find a moving car to use to launch. Make sure that the two car owners are comfortable opening the bonnet and identify the battery terminals and battery. jumper cables are the most popular tool used to start the car, as they are cheap and easy to store. jumper cables usually come in a variety of lengths ranging from 10-20 feet. Some people think that the longer cables are better so you do not have to move a car with a dead battery. But when long cables offer convenience, they may lose power as cable length, more energy must be moved. Cable tonnage means the cable resistance. The higher the gauge and thicker wires are. Six gauge is a standard size for jumper cables.
You should consider all security risks before making basic maintenance or repair of your car. First, ensure that young children are in a safe place away from the engine as you build how to jump dead car battery. Take a moment to read the manual for your car. Some vehicles require additional measures in order to have a successful jump. If you are not sure what to do, contact your Local Meineke Car Care Center for advice. Assuming your car will jump, care must be taken to prevent dangerous electric shock. When handling the jumper cables, be aware that their function is to transmit power from one vehicle to another. Once one end of jumper cables is connected to a car, do not touch the metal clamps for anything but the appropriate target. It is also recommended that a couple of glasses of sparks go flying in the air.
How to jump a car battery
To prepare for the jump:
1. Place the car works for vehicles face, preferably only about 18 inches apart, but never touch. For vehicles with automatic transmission, put the vehicle in the parking lot; for a manual gearbox, put the vehicle in neutral
2. Set the parking brakes on both, so that neither the car moves unexpectedly
3. Both cars must be switched off with keys removed
4. Establish lower bridge cables on the floor, ensuring that the clamps do not touch
5. Open the cover for two cars, and locate the batteries (see the owner for the location of the battery manual) and battery terminals. Usually, the two terminals of each battery is covered in red or black, with a + or – sign on top. Look at the batteries and make sure you can identify what is positive and which is negative. This distinction is crucial to the success of your jump. If the battery terminals are dirty, wipe them with a cloth or wire brush.
Now start setting the jumper cables:
1. Set the red, positive cable clamp to the positive (+) battery post of the dead battery. You want a solid connection to the battery terminal, which may require some initial torque pliers
2. Place the clamp red, positive cable across bridge cables terminals (+) positive battery operated vehicle
3. Connect the black clip, the negative cable to the negative terminal of the battery work (-) battery. Walk to the car with the dead battery. Do not connect the black of the dead battery connector negative. Instead, connect the clip, some unpainted metal car as a bright, clean nut in the engine block. This will help ensure a safe jump.
How long to charge a car battery dead
Now you are ready to try the jump start. Follow the instructions below to find out how and how long to charge the dead battery in your car:
1. Start the work vehicle
2. Wait a minute. Depending on the age of the battery and the time it is dead, you may have to run the car for a minute or two to get the jump to work.
3. Try to start the dead car. If the car does not start, allow the work vehicle to charge the battery for an additional minute or two before trying again. In some cases, the reactivation of driving a little car running while charging the dead battery can help.
4. Once the dead car is running, you can disconnect the jumper cables, from the negatives, black clamps cable. Do not let the clips and then receive a portion of the cable is still attached to a car.
5. From here, take a short drive. This will allow the battery to accumulate charge. This conduit enables the vehicle alternator to charge the battery and ensures that your vehicle does not die again once you turn it off.